Installing a stainless steel kitchen backsplash requires you to use a utility knife, painters tape, caulking gun, construction adhesive, silicone caulking and a craft paper to make a pattern. Either you can update an older kitchen with the current trends of stainless steel appliances or install a new kitchen backsplash and enhance your stylish stainless steel products. In order to compliment and facilitate the look of your stainless steel appliances, it is simple and affordable to install a stainless steel backsplash.
Appliances made of stainless steel are vey sleek, clear and modern looking. They are also easy to clean and can be an addition at the back of the stove. All you need to do is follow some simple instructions on how to install a stainless steel backsplashes and present your kitchen with a major makeover.
The first step requires you to close the electric to the power in the area you will be working and installing. You should also get rid of all outlets and switch covers connected to the area you are working. Starting with the end of the backsplash, first tape the craft paper to one end of the wall and move it out above the rest of the backsplash. Press the paper in place and use the utility knife to incise the length of the top and bottom ends so that the paper fits closely adjacent to the wall.
You should also use the utility knife to cut out the locations where the electrical outlet and switches are present. Next, take the paper out carefully since this pattern will be used to cut your stainless steel. Use this pattern to direct a pre-cut piece of stainless steel at a sheet metal fabricator or any local home improvement store.
Step two requires you to organize the wall for installation by cleaning it systematically. You should then cover up the counter top with newspapers to guard it from getting harmed by the pointy and sharp edges of the stainless steel backsplash. After this you come towards step three and apply the structure to the back of the stainless steel with the help of a caulking gun. You should then spread it out with a knife and make sure that it is soft and has no bumps of cement. The last step requires you to use the caulking gun and caulk the area connecting the counter top and the backsplash with silicone caulking.
For proper installation, care should be taken that no part of the wall is seen after the backsplash is installed. Once the backsplash is ready, it will be very useful to the user and give the kitchen a beautiful and trendy look.
Comments on this entry are closed.